AMSOIL Series 2000 Synthetic Racing Grease protects wheel bearings and chassis from the dangerous, damaging heat created by hot pavement, huge engines and the unceasing friction of intense speed. It is ideal for all high-temperature/high-speed applications.
Buy Now/Pricing Information (Opens in New Window)
Package sizes include:
- 14-oz. Cartridge
- 14-oz. Cartridges (case of 10)
- 14-oz. Cartridges (case of 40)
- 35-lb. Lug
- 120-lb. Keg
AMSOIL Product Code: GRG
Product Application
AMSOIL Series 2000 Synthetic Racing Grease meets the highest performance standards of the National Lubricating Grease Institute; GC for wheel bearing applications and LB forchassis applications.
Product Description
AMSOIL Series 2000 Synthetic Racing Grease protects wheel bearings and chassis from the dangerous, damaging heat created by hot pavement, huge engines and the unceasing friction of intense speed. It is ideal for all high-temperature/high-speed applications.
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated for high-temperature/high-speed applications. It also provides superior protection for low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease passes the Ford Film Strength Endurance Test with a 16 point margin (see graph). Most nonsolid-fortified racing greases, synthetic or conventional, do not pass. AMSOIL Series 2000 Racing Grease keeps greased components in like-new condition.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic base oil with a top-quality lithium complex thickener, known for its extraordinary performance in temperature extremes. AMSOIL Series 2000 Racing Grease offers excellent low-tem-perature pumpability and high-temperature consistency for dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease offers excellent oxidation resistance and a robust package of oxidation inhibitors, preventing grease breakdown and component surface damage in the high oxidizing conditions associated with high-temperature operation.
Friction Reduction
Because it effectively reduces friction, AMSOIL Series 2000 Racing Grease maximizes power through-put and fuel efficiency. The extra power provided by Series 2000 Racing Grease improves acceleration and top-end speed.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash-out and inhibits rust and other forms of corrosion.
Typical Technical Properties | ||
AMSOIL Synthetic Lithium Complex Racing Grease
|
Series 2000 Racing Grease | NLGI GC-LB |
Thickener | Lithium Complex | NR* |
NLGI Consistency Grade | 2 EP | NR* |
NLGI Performance Grade | GC-LB | NR* |
Penetration (ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes | 265 – 295 | 220 – 340 |
Dropping Point (ASTM D-566) °C [77° F] | 285 [545] | 220 [428] |
Water Washout (ASTM D-1264) 79° C [175° F] % loss | 5.1 | 15 max |
Oil Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss | 2.8 | 10 max |
Rust Protection (ASTM D-1743) | pass | pass |
Timken OK Load Test (ASTM D-2509), lbs. | 60 | NR* |
Fortified with Moly Compound | no | NR* |
Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm | 0.32 | 0.9 max |
Compatibility with other greases | excellent | NR* |
Extreme Pressure, Four Ball Method (ASTM D-2596) Weld Point, kgf | 400 | 200 min |
Extreme Pressure, Four Ball Method (ASTM D-2596) Load Wear Index, kgf | 65 | 30 min |
High Temperature Life (ASTM D-3527) hours | 300 | 80 min |
Fretting Wear (ASTM D-4170)* mg | 3.4 | 10 max |
Elastomer Compatibility (ASTM D-4289) Volume Change, %, GC | 21.6 | -5 to +30 |
Elastomer Compatibility (ASTM D-4289) Volume Change, %, LB | 9.88 | 0 to +30 |
Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, GC | -3 | +2 to -15 |
Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, LB | -6 | 0 to -10 |
Leakage (ASTM D-4290), G* | 6.0 | 10 max |
Low Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40° F] | 2.3 | 15.5 |
Water Spray Off (ASTM D-4049), % max | 22.7 | NR* |
* NR: Not Required for NLGI GC or LB labeling |