AMSOIL Synthetic Multi-Purpose Greases are qualified against the highest grease standards and are designed for multiple use applications. Composed of premium quality synthetic base oils and lithium complex thickeners, Multi-Purpose Greases provide superior film strength, shear resistance, adhesion properties and mechanical stability, and they excel in temperature extremes by providing excellent oxidation stability, high temperature dropping points and low temperature torque values and pumping capabilities.
Buy Now/Pricing Information (Opens in New Window)
Package sizes include:
- 35-lb. Lug
- 120-lb. Keg
- 400-lb. Drum
(no cartridge sizes available for grade NLGI #0)
AMSOIL Product Code: GLA
Product Application Specification
• GLA (#0) Cincinnati Milicron P-79 Spec
AMSOIL Synthetic Multi-Purpose Grease grade #0 is recommended in manual or automatic lubricating systems. NLGI #0 (GLA) has better mobility and is the preferred choice for colder applications, automatic lubrication systems with long pumping runs and gear box applications (where recommended by manufacturer).
The correct consistency grade of AMSOIL Synthetic Multi-Purpose Grease is recommended in heavy and light duty applications found in manufacturing plants, automobiles, agricultural and construction equipment. These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose Greases are suitable for use up to 350 degrees F. When operating at elevated temperatures, frequent regreasing may be required.
AMSOIL Synthetic Multi-Purpose Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Multi-Purpose Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.
AMSOIL Synthetic Multi-Purpose Greases are qualified against the highest grease standards and are designed for multiple use applications. Composed of premium quality synthetic base oils and lithium complex thickeners, Multi-Purpose Greases provide superior film strength, shear resistance, adhesion properties and mechanical stability, and they excel in temperature extremes by providing excellent oxidation stability, high temperature dropping points and low temperature torque values and pumping capabilities. AMSOIL Synthetic Multi-Purpose Greases are formulated with oil soluble extreme-pressure additives for heavy loads, as well as oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.
- High dropping point of 430°F
- Resists thermal and oxidation degradation
- Excellent water-washout resistance
- Good low temperature pumpability and torque values
- Adhesive and shear stable to prevent squeeze out
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.
|Typical Technical Properties|
|Synthetic GLA Grease||GLA|
|NLGI consistency grade||0|
|NLGI performance grade||NA|
|Penetration – ASTM D 217 (25°C [77°F], 0.1 mm) worked 60 strokes||355-385|
|Dropping point, °F[°C] – ASTM D2265||430 |
|High temperature life, hours – ASTM D 3527||120|
|Oxidation stability, psi – ASTM D 942 (100 hr/300 hr)||1/5|
|Water washout, percent – ASTM D 1264||16.7|
|Rust and corrosion – ASTM D 1743||pass|
|Oil separation, percent loss – ASTM D 1742 (24 hours, 25°C [77°F]||5.2|
|Leakage, g lost – ASTM D 4290||NA|
|Four ball wear test, mm scar – ASTM D 2266||0.45|
|Fretting wear, mg – ASTM D 4170||NA|
|Four ball EP, kgf – ASTM D 2596 |
Load wear index
|Timken OK load test, lbs – ASTM D 2509||45|
|Low temperature torque, N*m – ASTM D 4693 (-40°C [-40°F])||0.46|
|LT-37 pumpability, g/min (60°F/0°F [16°C/-18°C])||1475/73|
|Copper corrosion – ASTM D 4048||1B|
|Disc brake wheel bearing specifications |
Ford ESA-M1C 198-A
|Oil viscosity: |
40°C [104°F], cSt
100°C [212°F], cSt
|Flash point, °F[°C] – ASTM 92||450|
|Texture||smooth with tack|
NA: Not applicable