DOMINATOR™ Synthetic 2-Cycle Racing Oil TDR

Amsoil Dominator Synthetic 2-Cycle Racing Oil TDRDOMINATOR™, an AMSOIL exclusive formulation, lubricates and protects high performance two-cycle motors, both on and off the track. High performance motors, particularly those that are modified, operate hotter and at higher RPMs than recreational motors, and they need good oil for peak performance.

Buy Now/Pricing Information (Opens in New Window)

Package sizes include:

  • 1-Quart Bottle
  • 1-Quart Bottles (case of 12)
  • 1-Gallon Bottle
  • 1-Gallon Bottles (case of 4)
  • 16-Gallon Keg
  • 30-Gallon Drum
  • 55-Gallon Drum

AMSOIL Product Code: TDR

Product Application
DOMINATOR is recommended for use in high performance stock or modified two-cycle motors, including air or liquid cooled snowmobiles, personal watercraft, motorcycles (Moto X), ATVs, go-carts and outboard motors*. Good for use with coated or non-coated pistons, high-octane racing fuels and exhaust power valves. Compatible with most other two-cycle oils, however, mixing oils should be minimized.

Use at 50:1 pre-mix ratios (2.6 oz. oil per U.S. gallon of gas) or as injection oil where JASO FC or API TC oils are specified. Not suitable for use with alcohol or nitro-methane fuels.

Product Description
DOMINATOR, an AMSOIL exclusive formulation, lubricates and protects high performance two-cycle motors, both on and off the track. High performance motors, particularly those that are modified, operate hotter and at higher RPMs than recreational motors, and they need good oil for peak performance. DOMINATOR is engineered for racing. It has the right film strength and clean burning properties for “on the edge” operation.

  • Provides excellent film strength for high heat, high RPM motors
  • Reduces friction for maximum power
  • Recommended for use with coated or non-coated racing pistons
  • Recommended for use with exhaust power valves
  • Recommended for use with high octane racing gas
  • Burns clean; Prevents ring sticking and plug fouling
  • Provides excellent protection at 50:1 pre-mix or in injection system

Super Film Strength
High performance two-cycle motors have high compression ratios, which significantly increase combustion chamber heat and crankshaft bearing pressures. Hot combustion processes quickly burn off and evaporate light oils and cause rapid piston expansion, decreasing piston-to-cylinder wall clearances. This promotes piston scuffing and possible seizure. And increased pressure on crankshaft bearings promotes metal-to-metal contact, wear and pitting.

High heat and pressures require tough oil with better film strength and more lubricity. DOMINATOR, constructed with AMSOIL heavy synthetic oil, handles high heat better than mineral oils and provides improved film strength and lubricity. DOMINATOR reduces friction and provides an extra measure of protection against piston scuffing and crankshaft bearing wear.

Clean Burning
High combustion processes require the proper additives and oils to control deposits. DOMINATOR contains strong, high temperature detergent additives and highly pure AMSOIL synthetic oil. It prevents deposits that cause ring sticking, plug fouling and exhaust port blocking. DOMINATOR is an optimized product for severe service.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).

TYPICAL TECHNICAL PROPERTIES
DOMINATOR™ Synthetic 2-Cycle Racing Oil

Kinematic Viscosity @ 100°C, cSt (ASTM D-445)

7.7

Kinematic Viscosity @ 40°C, cSt (ASTM D-445)

41.4
Viscosity Index (ASTM D-2270)
157

Pour Point °C (°F) (ASTM D 97)

-46 (-51)

Flash Point °C (°F) (ASTM D 92)

92 (198)
Fire Point °C (°F) (ASTM D 92)
92 (198)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.

Leave a Reply

Your email address will not be published. Required fields are marked *