Synthetic Multi-Purpose Grease (GLC)

Amsoil Synthetic Multi-Purpose Grease GLCAMSOIL Synthetic Multi-Purpose Grease grade #2 is recommended in manual or automatic lubricating systems. NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments and wheel bearings and other automotive applications.The correct consistency grade of AMSOIL Synthetic Multi-Purpose Grease is recommended in heavy and light duty applications found in manufacturing plants, automobiles, agricultural and construction equipment.

Buy Now/Pricing Information (Opens in New Window)

Package sizes include:

  • 8-oz. Tube
  • 8-oz. Tubes (case of 12)
  • 14-oz. Cartridge
  • 14-oz. Cartridges (case of 10)
  • 14-oz. Cartridges (case of 40)
  • 35-lb. Lug
  • 120-lb. Keg
  • 400-lb. Drum

AMSOIL Product Code: GLC

Product Application Specification

  • GLC (#2) ASTM D-4950 (NLGI) Service GC/LB
  • GLC (#2) Cincinnati Milicron P-64 Spec
  • GLC (#2) Mack MG-C

AMSOIL GLC Greases grade #2 is recommended for use in manual or automatic lubricating systems. NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments. and is the primary choice for wheel bearings.

The correct consistency grade of AMSOIL GL multi-purpose greases are recommended for use in heavy and light duty applications found in manufacturing plants, automotive applications, agricultural equipment and construction equipment. These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings. chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL GL greases are suitable for use up to 350 F When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL GL Lithium Complex Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of the GL grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fitting clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.

Product Description
AMSOIL Synthetic Multi-Purpose Grease grade #2 is recommended in manual or automatic lubricating systems.

NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments and wheel bearings and other automotive applications.

The correct consistency grade of AMSOIL Synthetic Multi-Purpose Grease is recommended in heavy and light duty applications found in manufacturing plants, automobiles, agricultural and construction equipment.

These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose Greases are suitable for use up to 350 degrees F. When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL Synthetic Multi-Purpose Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Multi-Purpose Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

PERFORMANCE FEATURES

  • High dropping point of 500°F+
  • Resists thermal and oxidation degradation
  • Excellent water-washout resistance
  • Good low temperature pumpability and torque values
  • Adhesive and shear stable to prevent squeeze out

APPLICATION MAINTENANCE
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fitting clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.

Typical Technical Properties
Synthetic GLC Grease GLC NLGI GC/LB
Thickener lithium complex NR
NLGI consistency grade 2 NR
NLGI performance grade GC-LB NR
Penetration – ASTM D 217 (25°C [77°F], 0.1 mm) worked 60 strokes 265-295 220-340 min
Dropping point, °F[°C] – ASTM D2265 550 [288] 428 [220] min
High temperature life, hours – ASTM D 3527 160 80 min
Oxidation stability, psi – ASTM D 942 (100 hr/300 hr) 0/3 NR
Water washout, percent – ASTM D 1264 1.8 15 max
Rust and corrosion – ASTM D 1743 pass pass
Oil separation, percent loss – ASTM D 1742 (24 hours, 25°C [77°F] 1.1 6.0 max
Leakage, g lost – ASTM D 4290 1.0 10 max
Four ball wear test, mm scar – ASTM D 2266 0.40 0.60 max
Fretting wear, mg – ASTM D 4170 3.4 10 max
Four ball EP, kgf – ASTM D 2596

Weld point

Load wear index

 

400

50

 

200 min

30 min

Timken OK load test, lbs – ASTM D 2509 50 NR
Low temperature torque, N*m – ASTM D 4693 (-40°C [-40°F]) 1.3 15.5 max
LT-37 pumpability, g/min (60°F/0°F [16°C/-18°C]) 360/7 NR
Copper corrosion – ASTM D 4048 1B NR
Disc brake wheel bearing specifications

Ford ESA-M1C 198A

Chrysler MS-3701

 

yes

yes

 

NR

NR

Oil viscosity:

40°C [104°F], cSt

100°C [212°F], cSt

 

151

19.2

 

NR

NR

Flash point, °F[°C] – ASTM 92 450[232] NR
Color red NR
Texture smooth with tack NR
NA: Not applicable

NR: Not required for NLGI GC-LB labeling

Buy Now/Pricing Information (Opens in New Window)

Leave a Reply

Your email address will not be published. Required fields are marked *